BLIND SPOT MONITOR SENSOR INSTALLATION


  1. INSTALL BLIND SPOT MONITOR SENSOR LH


    1. Connect the connector.

    2. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL BLIND SPOT MONITOR SENSOR RH


    1. Connect the connector.

    2. Install the blind spot monitor sensor RH with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL REAR BUMPER ASSEMBLY

    Click here

  4. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

    Click here

  5. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

    Click here

    SST
    09870-60000   ( 09870-60010 )
    09870-60040

  6. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here