PARKING ASSIST MONITOR SYSTEM (w/ Parallel Parking Assist Function) DIAGNOSIS SYSTEM


  1. PARKING ASSIST MONITOR DIAGNOSIS SYSTEM


    1. For parking assist monitor system diagnosis, signals received by the multi-media module receiver assembly can be checked and the parking assist monitor system can be calibrated, adjusted and checked using the multi-display assembly.

      Note

      Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

      Tech Tips

      The displayed items may differ depending on vehicle specifications.

  2. DIAGNOSIS SCREEN TRANSITION (during parking assist monitor system initialization)

    A01G7I5E01
    A01G6BI

  3. DIAGNOSIS SCREEN TRANSITION (after parking assist monitor system initialization)

    A01G7I5E01
    A01G94E

  4. VEHICLE SIGNAL CHECK


    1. Start diagnostic mode Click here.

    2. A01G54Z

      Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting I" screen.

    3. A01G6QP

      Select "Vehicle Signal" on the "Function Check/Setting I" screen.

    4. A01G5UY

      Vehicle Signal Check Mode


      1. When the "Vehicle Signal Check Mode" screen is displayed, check the item displayed for "REV".

        Tech Tips


        • Only conditions having inputs are displayed.

        • This screen displays vehicle signals input to the multi-media module receiver assembly.

    5. Finish diagnostic mode Click here.

  5. CAR SIGNAL CHECK (parking assist monitor system input signals)


    1. Start diagnostic mode Click here.


      1. A01G54Z

        Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting I" screen.

      2. A01G6QP

        Select "Camera Setting" on the "Function Check/Setting I" screen.

      3. A01G9H6

        Select "Next" on the "Car Information Check" screen.

        Tech Tips

        After "Next" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system was performed after the multi-media module receiver assembly was replaced.

        Parking Assist Monitor System Initialization Screen Transition
        Not performed Car Signal Check screen
        Performed Mode Setting screen
      4. A01G9PN

        When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Car Signal Check" screen.

        Tech Tips

        To select a grayed out item, select and hold the item for 2 seconds or more.

    2. A01G71Y

      Car Signal Check


      1. On the "Car Signal Check" screen, it is possible to inspect the state of signals and check the settings.

        Item Inspection Detail Note
        BCTY Luggage courtesy switch signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.

        Tech Tips


        • When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.

        • If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".

    3. BCTY inspection

      Tech Tips

      If "CHK" (red) is displayed for "BCTY", check for DTCs and perform troubleshooting based on the output DTCs Click here.

    4. Finish diagnostic mode Click here.

  6. CALIBRATION WHEN SERVICING VEHICLE

    Note

    Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.