REMOTE TOUCH (for Multi-Media Module Receiver Type) INSTALLATION


  1. INSTALL REMOTE TOUCH


    1. Engage the 8 claws to install the remote touch.

  2. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 7 claws and 4 clips to install the console panel sub-assembly.

    4. Move the shift lever to P.

  3. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G96C

      Engage the 2 claws and 5 clips to install the lower center instrument panel finish panel as shown in the illustration.