NAVIGATION SYSTEM Knob of Remote Touch Moves Spontaneously

INSPECTION PROCEDURE

PROCEDURE


  1. CONFIRM SYMPTOMS


    1. Recheck the situation in which the malfunction occurs.

      Tech Tips


      • When the engine switch is turned on (ACC), the remote touch switch knob moves automatically to the center of the movable area.

      • When driving on a rough road where the vehicle lurches or shakes around due to the bumps, the remote touch switch knob may move unexpectedly as a result.

      Result
      Result Proceed to
      Symptom occurs in any situation. A
      Remote touch switch knob moves to the center when the engine switch is turned on (ACC). B
      Symptom occurs when driving on a rough road causes the vehicle to lurch or shake around. B

    B

    END

    A

  2. CHECK FOR FOREIGN MATTER


    1. Check if there is any foreign matter around the remote touch switch knob that interfere with knob operation.

      OK
      There is no foreign matter around the remote touch switch knob that interrupt its operation.

    NG

    REMOVE FOREIGN MATTER (CHECK KNOB OPERATION AGAIN AFTER REMOVING MATTER)

    OK

  3. REMOTE TOUCH SELF CHECK (REMOTE TOUCH SWITCH KNOB FEEDBACK FORCE GENERATION CHECK)


    1. A01G47EE01
      Text in Illustration
      *a Switch Knob
      *b Control Direction
      *c Feedback Force

      Check the remote touch switch knob feedback force.


      1. Move the remote touch switch knob up, down, right and left to check that feedback force is generated.

        OK
        Feedback force is generated.

        Tech Tips

        When the engine switch is turned on (ACC), feedback force is generated. When the engine switch is turned off, feedback force is not generated, and the remote touch switch knob will move freely.


    NG

    REPLACE REMOTE OPERATION BOARD Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here