NAVIGATION SYSTEM CD/DVD Sound Skips

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precautions for Navigation System Click here.

PROCEDURE


  1. CHECK DISC


    1. A01G52Z

      Check that the disc is not deformed or cracked.

      OK
      No deformation or cracks on the disc

    NG

    DISC IS FAULTY

    OK

  2. CHECK DISC


    1. A01G7H0

      Check the disc.

      OK
      The disc is clean.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Tech Tips

      If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.


    NG

    CLEAN DISC

    OK

  3. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

    NG

    CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END

  4. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Check the multi-media module receiver assembly installation condition.


      1. Check that the multi-media module receiver assembly is properly installed.

        OK
        Multi-media module receiver assembly is properly installed.

    NG

    REINSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    OK

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here