INSTRUMENT PANEL SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 bolts.

      Note

      Do not touch the speaker cone.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01G6HV

      Engage the 3 guides as shown in the illustration.

    2. Engage the 2 clips to install the No. 1 instrument panel speaker panel sub-assembly as shown in the illustration.

  3. INSTALL FRONT PILLAR GARNISH


    1. Remove the protective cover.

    2. Make sure that the front pillar garnish clip is not damaged.

      Note

      If there is any damage, replace the garnish clip with a new one.

    3. A01G7ML

      Install the front pillar garnish clip to the front pillar garnish LH.

      Tech Tips

      Install the front pillar garnish clip as shown in the illustration.

    4. Engage the 2 guides as shown in the illustration.

    5. A01G6YF

      Engage the 2 clips to install the front pillar garnish LH.

  4. INSTALL FRONT DOOR OPENING TRIM COVER


    1. Engage the guide.

    2. Engage the 3 claws to install the front door opening trim cover LH.

  5. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 3 speaker assembly with the 2 bolts.

      Note

      Do not touch the speaker cone.

  6. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. A01G94T

      Engage the 2 claws and 4 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.