INSTRUMENT PANEL SPEAKER REMOVAL


  1. REMOVE FRONT DOOR OPENING TRIM COVER


    1. A01G9KP

      Disengage the 3 claws.

    2. Disengage the guide and remove the front door opening trim cover LH.

  2. REMOVE FRONT PILLAR GARNISH


    1. A01G55KE01
      Text in Illustration
      *1 Front Pillar Garnish Clip

      Pull the upper part of the garnish toward the inside of the cabin and disengage the garnish from the base of the 2 clips.

      Tech Tips

      Make the front pillar garnish LH hang down from the front pillar garnish clip.

    2. A01G7M3E01

      While pushing the tabs on the front pillar garnish clip in the direction indicated by the arrow (A) shown in the illustration, disengage the front pillar garnish clip.

    3. Pull the garnish in the direction indicated by the arrow (B) shown in the illustration to disengage the 2 guides and remove the front pillar garnish LH.

    4. A01G5BXE01
      Text in Illustration
      *1 Adhesive Tape
      *2 Protective Cover
      *3 Curtain Shield Airbag Assembly

      Protect the curtain shield airbag assembly.


      1. Cover the airbag with a piece of cloth or nylon and secure the edges of the cover with tape as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish LH is removed.

  3. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01G63Q

      Using a moulding remover, disengage the 2 clips as shown in the illustration.

    2. Disengage the 3 guides to remove the No. 1 instrument panel speaker panel sub-assembly as shown in the illustration.

  4. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. A01G67I

      Remove the 2 bolts.

    2. Lift the front No. 2 speaker assembly and disconnect the connector to remove it.

      Note

      Do not touch the speaker cone.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  5. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. A01G8L5

      Using a moulding remover, disengage the 2 claws and 4 clips and remove the No. 1 speaker opening cover assembly as shown in the illustration.

  6. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A01G8EZ

      Remove the 2 bolts.

    2. Lift the front No. 3 speaker assembly and disconnect the connector to remove it.

      Note

      Do not touch the speaker cone.