REAR DOOR SPEAKER INSTALLATION

Tech Tips

Use the same procedure for the RH side and LH side.


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 15 Speakers)


    1. Engage the 3 claws to install the rear No. 2 speaker assembly.

      Note

      Do not touch the speaker cone.

  2. INSTALL REAR SPEAKER ASSEMBLY


    1. Install the rear speaker assembly with the 3 screws.

      Note

      Do not touch the speaker cone.

    2. Connect the connector.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01G5TOE01
      Text in Illustration
      *a Reference Point

      Install the No. 1 door scuff plate clamp as shown in the illustration.

    2. A01G5MFE01
      Text in Illustration
      *1 Rear Door Inside Locking Cable Assembly
      *2 Rear Door Lock Remote Control Cable Assembly

      Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. w/ Illumination:


      1. Connect the connector.

    4. for 15 Speakers:


      1. Connect the connector.

    5. A01G787E01
      Text in Illustration
      *1 Reference Boss
      *2 Rear Door Inner Glass Weatherstrip

      Engage the rear door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

    6. A01G9NA

      Engage the 8 clips and install the rear door trim board sub-assembly.

    7. A01G5FU

      Install the 3 screws.

  4. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01G657E01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  5. INSTALL REAR DOOR NO. 1 STIFFENER CUSHION


    1. A01G5KG

      Install the rear door No. 1 stiffener cushion with the screw.

  6. INSTALL DOOR PULL HANDLE COVER


    1. A01G8OX

      Install the door pull handle cover.

  7. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A01G72N

      Engage the 2 guides, 2 clips and 4 claws to install the rear power window regulator switch assembly with rear door armrest base panel.

  8. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


    1. A01G7ES

      Engage the 3 claws to install the rear door inside handle bezel plug.