AUDIO AND VISUAL SYSTEM (w/ Multi-display) Disc cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System Click here.

PROCEDURE


  1. CHECK IF A PROPER DISC IS INSERTED


    1. Make sure that the disc is an audio disc or a disc with MP3 or WMA files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      Normal disc

      Tech Tips


      • Translucent or uniquely-shaped discs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to Owner's Manual.


    NG

    CHANGE DISC

    OK

  2. CHECK THAT DISC IS INSERTED PROPERLY


    1. Check whether or not the disc is inserted upside down.

      OK
      Disc is properly inserted.

    NG

    INSERT DISC PROPERLY

    OK

  3. CLEAN DISC AND RECHECK


    1. A01G7H0

      Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note

      Do not use a conventional record cleaner or anti-static preservative.


    NG

    REPLACE DISC AND RECHECK Click here

    OK

    END (DISC WAS DIRTY)

  4. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END (DISC WAS FAULTY)