AUDIO AND VISUAL SYSTEM (w/ Multi-display), Diagnostic DTC:B1575

DTC Code DTC Name
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)

DESCRIPTION

The multi-media module receiver assembly and multi-display assembly are connected via a video signal (digital) line.

This DTC is stored when a video signal (digital) line is disconnected.

DTC No. DTC Detection Condition Trouble Area
B1575 Video signal (digital) is lost.

  • Harness and connector

  • Multi-media module receiver assembly

  • Multi-display assembly

WIRING DIAGRAM

A01G8GEE18

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System Click here.

PROCEDURE


  1. REPLACE HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - MULTI-DISPLAY ASSEMBLY)


    1. Replace the harness and connector.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-DISPLAY ASSEMBLY Click here

    OK

    END

  2. REPLACE MULTI-DISPLAY ASSEMBLY


    1. Replace the multi-display assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END