STEERING HEATER SWITCH INSPECTION


  1. INSPECT STEERING HEATER SWITCH (COMBINATION SWITCH ASSEMBLY)


    1. A01G4MOE03
      Text in Illustration
      *a

      Component without harness connected

      (Steering Heater Switch (Combination Switch Assembly))

      Remove the steering heater switch (combination switch assembly) Click here.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      9 (IG) - 3 (IN) Steering heater switch (combination switch assembly) is pushed Below 1 Ω
      9 (IG) - 3 (IN) Steering heater switch (combination switch assembly) is not pushed 10 kΩ or higher