STEERING WHEEL REMOVAL

Note


  • Do not replace the spiral cable with sensor sub-assembly with the battery connected and the engine switch on (IG).

  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the battery connected and the engine switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. Disconnect the connectors from the spiral cable sub-assembly.

    2. w/ Steering Heater:


      1. A01G5HW

        Disconnect the connector.

    3. A01G4KOE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    4. Put matchmarks on the steering wheel assembly and steering main shaft.

    5. A01G6J0E01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable.

    2. A01G5W9

      Remove the 2 screws.

    3. Disengage the 2 claws and 2 pins to remove the steering pad switch assembly from the steering wheel sub-assembly.

  5. REMOVE CRUISE CONTROL MAIN SWITCH


    1. A01G69R

      Remove the 2 screws.

    2. A01G7NC

      Disconnect the connector and remove the cruise control main switch as shown in the illustration.

  6. REMOVE CRUISE CONTROL SWITCH WIRE


    1. Remove the cruise control switch wire.

  7. REMOVE STEERING SHAKE DAMPER


    1. A01G6RE

      Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.

  8. REMOVE LOWER STEERING WHEEL BOSS COVER


    1. w/ Steering Heater:


      1. A01G853

        Disconnect the connector.

      2. A01G8ZVE01
        Text in Illustration
        *a Double-sided Tape

        Remove the double-sided tape and separate the steering heater harness from the lower steering wheel boss cover.

    2. A01G6EM

      Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.

  9. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)


    1. A01G4VJ

      Disengage the clamp.

    2. Remove the 2 screws and steering wheel heater control assembly from the lower steering wheel boss cover.