POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

*: Use the GTS.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally Click here.

      Result
      Result Proceed to
      CAN DTCs are not output. A
      CAN DTCs are output. B

      B

      GO TO CAN COMMUNICATION SYSTEM Click here

      A

  4. CHECK FOR DTCs*


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

      B

      GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

      A

  5. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Problem symptom does not occur. A
      Problem symptom occurs. B

      B

      Go to step 7
      A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU Click here

    2. Data List / Active Test Click here


      NEXT

  7. REPAIR


    NEXT

  8. CONFIRMATION TEST


    NEXT
    END