PARKING BRAKE CABLE REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE PARKING BRAKE PEDAL SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A01G6W7

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. A01G79V

      Remove the adjusting nut.

    3. A01G603

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  3. REMOVE REAR DOOR SCUFF PLATE LH


    1. A01G5TH

      Disengage the 8 claws and remove the rear door scuff plate LH.

  4. REMOVE CENTER PILLAR LOWER GARNISH LH


    1. A01G8HO

      Disengage the 2 claws and 2 guides.

    2. Disengage the 5 clips and remove the center pillar lower garnish LH.

  5. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  6. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  7. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  10. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. REMOVE AUDIO AMPLIFIER COVER


    1. A01G7J8

      Using a clip remover, remove the clip.

    2. Disengage the 2 claws and remove the audio amplifier cover.

  12. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. A01G6BH

      Disconnect each connector.

    2. Remove the bolt.

    3. Disengage the 2 guides and remove the stereo component amplifier assembly with bracket.

  13. REMOVE AUDIO AMPLIFIER COVER (w/ Telematics Transceiver)


    1. A01G54W

      Using a clip remover, remove the 2 clips and audio amplifier cover.

  14. REMOVE TELEMATICS TRANSCEIVER WITH MAYDAY BATTERY (w/ Telematics Transceiver)


    1. A01G7B6

      Remove the bolt and disengage the 2 guides.

    2. Pull out the telematics transceiver with mayday battery in the direction indicated by the arrow shown in the illustration.

    3. A01G6O1

      Disconnect each connector.

  15. REMOVE FLOOR CARPET HOOK


    1. A01G55ZE01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 guides.

    2. A01G7CPE01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 clamps and remove the 6 floor carpet hooks.

  16. REMOVE FRONT FLOOR CAUTION PLATE COVER


    1. A01G8ZB

      Using a moulding remover, disengage the claw and guide, and remove the front floor caution plate cover.

  17. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. A01G8KN

      Disengage the 2 clamps and separate the wire harness from the No. 2 console box mounting bracket.

    2. A01G54G

      Remove the 2 bolts and No. 2 console box mounting bracket.

  18. REMOVE NO. 4 CROSS MEMBER FLOOR REINFORCEMENT SUB-ASSEMBLY


    1. Turn back the floor carpet to a position where the No. 4 cross member floor reinforcement sub-assembly can be removed.

    2. A01G8DX

      Remove the 8 bolts and No. 4 cross member floor reinforcement sub-assembly.

  19. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A01G8C6E01
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. A01G6IQE01
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  20. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2AR-FE)

    Click here

  21. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR (for 2AR-FE)


    1. A01G9F3

      Remove the 3 nuts and front No. 2 floor heat insulator.

  22. REMOVE PARKING BRAKE SHOE LEVER

    Click here

  23. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)


    1. A01G7JC

      Remove the 2 bolts and 2 clips.

      Text in Illustration
      A01G8AH Bolt
      A01G47H Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  24. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)


    1. A01G7ZN

      Remove the 2 bolts.

      Text in Illustration
      A01G8AH Bolt
      A01G47H Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  25. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01G6OB

      Remove the clip from the No. 3 parking brake cable assembly.

    2. A01G5SH

      Remove the bolt and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      A01G4UB

  26. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp.