FRONT BRAKE FLEXIBLE HOSE REMOVAL

Note

If the left and right hoses are disconnected at the same time, be sure to place a mark on each hose to indicate its installation position.

Tech Tips


  • The following procedure is for vehicles except 2-pot Caliper.

  • Use the same procedure for vehicles for 2-pot Caliper.

  • The following procedure is for the LH side.

  • Use the same procedure for the LH side and RH side.


  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  3. REMOVE FRONT FLEXIBLE HOSE


    1. A01G5U7

      Remove the union bolt and gasket, and separate the front flexible hose from the front disc brake cylinder assembly.

    2. A01G71IE01
      Text in Illustration
      *1 Clip

      Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting points.

    3. Remove the clip.

    4. A01G8W0

      Remove the bolt and front flexible hose from the front shock absorber assembly.