BRAKE MASTER CYLINDER (for LHD) REASSEMBLY


  1. INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

    2. Install the 2 brake master cylinder reservoir grommets to the brake master cylinder reservoir assembly.

  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Install the brake master cylinder reservoir assembly to the brake master cylinder assembly.

  3. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Mount the brake master cylinder assembly in a vise.

      Note


      • Place aluminum plates on the vise to prevent damage to the brake master cylinder assembly.

      • Do not drop the brake master cylinder reservoir assembly.

    2. A01G5VO

      Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir assembly.

  4. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

  5. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY