BRAKE PEDAL (for RHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Tech Tips

    Use the same procedure as for LHD Click here.

  2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)


    1. A01G6NS

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt and headlight leveling ECU assembly.

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01G4W5

      Disconnect the connector.

    2. A01G5IL

      Turn the stop light switch assembly counterclockwise and remove it.

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN


    1. A01G6DY

      Remove the clip and push rod pin.

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01G7MY

      Remove the brake pedal return spring from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01G77G

      Disconnect the connector.

    2. A01G9D5

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01G5WI

      Remove the 4 nuts and brake pedal support assembly.