BRAKE PEDAL (for LHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)


    1. A01G6NS

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt and headlight leveling ECU assembly.

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01G4W5

      Disconnect the connector.

    2. A01G5IL

      Turn the stop light switch assembly counterclockwise and remove it.

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN


    1. A01G7NH

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01G9LS

      Remove the brake pedal return spring from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01G7UH

      Disconnect the brake pedal load sensing switch connector and disengage the clamp.

    2. A01G9DM

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01G5GQ

      Remove the 4 nuts and brake pedal support assembly.