DESCRIPTION
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1419 | A data malfunction signal is received from the acceleration sensor. | Yaw rate and acceleration sensor (Airbag sensor assembly) |
| C1435 | A data malfunction signal is received from the yaw rate sensor. | Yaw rate and acceleration sensor (Airbag sensor assembly) |
INSPECTION PROCEDURE
Note
When replacing the yaw rate and acceleration sensor (airbag sensor assembly), perform zero point calibration Click here.
PROCEDURE
REPLACE AIRBAG SENSOR ASSEMBLY
Replace the yaw rate and acceleration sensor (airbag sensor assembly) Click here.
Note
Check the yaw rate and acceleration sensor signal after replacement Click here.
Tech Tips
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts Click here.
| NEXT |
|
END