TIRE PRESSURE WARNING INITIATOR (for Front Side) INSTALLATION


  1. INSTALL FRONT TIRE PRESSURE MONITOR INITIATOR


    1. Engage the tab into the hole to temporarily install the front tire pressure monitor initiator.

    2. Install the nut.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    3. Connect the connector to the front tire pressure monitor initiator.

  2. INSTALL ENGINE UNDER COVER LH

  3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

  4. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here