FRONT LOWER SUSPENSION ARM (for 2GR-FE) INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY


    1. Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.

    2. A01G5OME01

      Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

      Torque:
      Bolt 1, 2
      200 N*m  { 2039 kgf*cm, 148 ft.*lbf }
      Bolt 3
      135 N*m  { 1377 kgf*cm, 100 ft.*lbf }

      Note

      While keeping the nut from rotating, tighten the bolt.

  2. INSTALL ENGINE MOUNTING INSULATOR

    Tech Tips

    Perform this procedure only when replacement of the engine mounting insulator LH is necessary.


    1. Temporarily install the engine mounting insulator LH with the 3 nuts.

  3. INSTALL FRONT FRAME ASSEMBLY

    Click here