FRONT SUSPENSION MEMBER REMOVAL


  1. REMOVE FRONT FRAME ASSEMBLY

    for 2AR-FE: Click here

    for 2GR-FE: Click here

  2. REMOVE FRONT ENGINE MOUNTING INSULATOR (for 2AR-FE)


    1. A01G4HU

      Remove the 3 nuts and front engine mounting insulator.

      Tech Tips

      Perform this procedure only when replacement of the front engine mounting insulator is necessary.

  3. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE)


    1. A01G4R5E01
      Text in Illustration
      *A w/o Transmission Oil Thermostat
      *B w/ Transmission Oil Thermostat

      Remove the 3 nuts and front engine mounting insulator assembly.

      Tech Tips

      Perform this procedure only when replacement of the front engine mounting insulator assembly is necessary.

  4. REMOVE ENGINE MOUNTING INSULATOR LH (for 2AR-FE)


    1. A01G8UJ

      Remove the 2 hole plugs from the front frame assembly.

    2. Remove the 3 nuts and engine mounting insulator LH.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator LH is necessary.

  5. REMOVE ENGINE MOUNTING INSULATOR LH (for 2GR-FE)


    1. A01G4NU

      Remove the 2 hole plugs from the front frame assembly.

    2. Remove the 3 nuts and engine mounting insulator LH.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator LH is necessary.

  6. REMOVE ENGINE MOUNTING INSULATOR RH (for 2AR-FE)


    1. A01G47X

      Remove the 2 hole plugs from the front frame assembly.

    2. Remove the 3 nuts and engine mounting insulator RH.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator RH is necessary.

  7. REMOVE ENGINE MOUNTING INSULATOR RH (for 2GR-FE)


    1. A01G8HX

      Remove the 2 hole plugs from the front frame assembly.

    2. Remove the 3 nuts and engine mounting insulator RH.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator RH is necessary.

  8. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01G4G4

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

  9. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  10. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY


    1. Remove the front stabilizer bar with 2 front stabilizer link assemblies from the front frame assembly.

  11. REMOVE STEERING LINK ASSEMBLY


    1. A01G8GY

      Remove the 2 bolts, 2 nuts and steering link assembly.

      Note

      Keep the nut from rotating while turning the bolt because the nut has its own stopper.

  12. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01G5OM

      Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.

      Note

      When removing the bolt, keep the nut from rotating.

    2. Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.

  13. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  14. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER


    1. A01G6YM

      Remove the 2 bolts and front suspension member dynamic damper from the front frame assembly.

  15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER


    1. Remove the 2 front suspension member body mounting front stoppers from the front frame assembly.

  16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER


    1. Remove the 2 front suspension member body mounting rear stoppers from the front frame assembly.

  17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION


    1. A01G6QSE01
      Text in Illustration
      *1 Front Suspension Member Body Mounting Front Cushion

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011, 09958-04011 )
    2. A01G4KXE05
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front suspension member body mounting front cushion from the front frame assembly.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  18. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH


    1. A01G44QE01
      Text in Illustration
      *1 Front Suspension Member Body Mounting Rear Cushion LH

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011, 09958-04011 )
    2. A01G6YPE05
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front suspension member body mounting rear cushion LH from the front frame assembly.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  19. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH

    Tech Tips

    Perform the same procedure as the LH side.

  20. REMOVE HOLE PLUG


    1. Remove 10 hole plugs from the front frame assembly.

      A01G5WJE01

      Tech Tips

      There are 4 different shapes of hole plug.