SHIFT LEVER REMOVAL


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE FLOOR CARPET BRACKET LH


    1. A01G47K

      Remove the 2 clips.

    2. Disengage the 2 guides to remove the floor carpet bracket LH.

  3. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    1. A01G7N9

      Remove the screw and No. 1 console box mounting bracket from the lower shift lever assembly.

  4. REMOVE NO. 1 CONSOLE BOX DUCT


    1. A01G6ZL

      Remove the clip and No. 1 console box duct.

  5. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01G58U

      Disconnect the connector.

    2. Disengage the clamp and remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

  6. REMOVE LOWER SHIFT LEVER ASSEMBLY


    1. Move the shift lever to N.

    2. A01G6FF

      Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.

    3. Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.

    4. A01G4KL

      Disconnect the 4 clamps and 2 connectors from the lower shift lever assembly.

    5. A01G5V7

      Remove the 4 bolts and lower shift lever assembly from the shift lever support.

  7. REMOVE SHIFT LEVER SUPPORT


    1. A01G8QI

      Remove the 4 bolts and shift lever support from the body.