OIL PUMP REASSEMBLY


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01G6AEE01

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      SST
      09350-32014   ( 09351-32140 )
      Oil seal driven in depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01G4UO

      Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.

      Note

      Ensure that the front oil pump body O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01G7ZS

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing up.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01G9O6

      Coat the front oil pump drive gear with ATF, and install it to the front oil pump body sub-assembly with the marked side facing up.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. A01G9JJE01

      Align each knock pin of the stator shaft assembly with the holes in the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

    2. Using a "TORX" socket wrench (T30), install the 16 bolts.

      Torque:
      9.3 N*m  { 95 kgf*cm, 82 in.*lbf }
      Bolt Length
      Bolt A
      14 mm (0.551 in.)
      Bolt B
      26 mm (1.02 in.)

  6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. A01G4P1

      Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.

      Note

      Be careful not to damage the front oil pump oil seal lip.