AIR COOLED OIL COOLER INSTALLATION


  1. INSTALL AIR COOLED OIL COOLER


    1. Temporarily install the air cooled oil cooler with the bolt and 2 nuts.

    2. Fully tighten the 2 nuts and then bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the 2 oil cooler hoses to the air cooled oil cooler and engage the 2 clamps.

  2. ADD AUTOMATIC TRANSAXLE FLUID

    Click here

  3. INSTALL ENGINE UNDER COVER LH

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

  5. INSTALL ENGINE UNDER COVER RH

  6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH