AUTOMATIC TRANSAXLE SYSTEM TERMINALS OF ECU


  1. TCM

    A01G9SGE17

    Tech Tips

    Each TCM terminal standard voltage is shown in the table below.

    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

    Use the illustration above as a reference for the TCM terminals.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    D6-15 (R) - D6-8 (E1) L - BR R shift position switch signal Engine switch on (IG) and shift lever in R 11 to 14 V
    Engine switch on (IG) and shift lever not in R Below 1 V
    D6-16 (D) - D6-8 (E1) R - BR D shift position switch signal Engine switch on (IG) and shift lever in D and S 11 to 14 V
    Engine switch on (IG) and shift lever not in D or S Below 1 V
    D6-12 (STP) - D6-8 (E1) GR - BR Stop light switch signal Brake pedal is depressed 7.5 to 14 V
    Brake pedal is released Below 1.5 V
    D6-11 (NSW) - D6-8 (E1) R - BR Park/Neutral position switch assembly signal Engine switch on (IG) and shift lever in P or N Below 2 V
    Engine switch on (IG) and shift lever not in P or N 11 to 14 V
    D6-10 (STA) - D6-8 (E1) Y - BR Starter signal Cranking (shift lever in P or N) 11 to 14 V
    D6-3 (SPD) - D6-8 (E1) G - BR Vehicle speed signal from combination meter assembly Vehicle driving Pulse generation
    D6-1 (BATT) - D6-8 (E1) W - BR Battery (for measuring battery voltage and for TCM memory) Always 11 to 14 V
    D6-13 (IGSW) - D6-8 (E1) B - BR IG signal Engine switch on (IG) 11 to 14 V
    D6-18 (+B) - D6-8 (E1) W - BR Power source of TCM Engine switch on (IG) 11 to 14 V
    D6-6 (CAN+) - D6-8 (E1) B - BR CAN communication line Engine switch on (IG) Pulse generation
    D6-7 (CAN-) - D6-8 (E1) Y - BR CAN communication line Engine switch on (IG) Pulse generation

  2. ECM

    Tech Tips

    Each ECM terminal standard voltage is shown in the table below.

    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

    Use the illustration below as a reference for the ECM terminals.

    A01G8CZE05
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A22-37 (S) - D23-49 (E1) Y - BR S shift position switch signal Engine switch on (IG) and shift lever in S 11 to 14 V
    Engine switch on (IG) and shift lever not in S Below 1 V
    A22-34 (SFTU) - D23-49 (E1) R - BR Up shift switch signal Engine switch on (IG) and shift lever in S 11 to 14 V
    Engine switch on (IG) and shift lever in "+" (Up shift) Below 1 V
    A22-50 (SFTD) - D23-49 (E1) L - BR Down shift switch signal Engine switch on (IG) and shift lever in S 11 to 14 V
    Engine switch on (IG) and shift lever in "-" (Down shift) Below 1 V