DYNAMIC RADAR CRUISE CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Radar Cruise / Data List.

    5. Read the Data List according to the display on the GTS.

      Radar Cruise
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Accel Request Accelerator request signal / min.: -2621.44 km/h/s, max.: 2621.36 km/h/s No vehicle in front -
      Vehicle Distance Millimeter wave radar sensor / min.: 0 m (0 ft.), max.: 6553.5 m (21502.04 ft.) Distance to vehicle in front -
      L/C Option Flag Dynamic radar cruise option flag / No or Yes

      Yes: Dynamic radar cruise control system can be used

      No: Dynamic radar cruise control system cannot be used

      		 -
      Car Dist Time Setting Vehicle distance time setting condition / No, Long, Mid, or Shrt Vehicle-to-vehicle distance selected by steering pad switch (distance control switch) -
      O/D Cut Request O/D cut request / Not Req or Request Not Req: Idling -
      Shift Down Rqst to 3rd Shift down request to 3rd gear / Not Req or Request Not Req: Idling -
      Shift Down Rqst to 4th Shift down request to 4th gear / Not Req or Request Not Req: Idling -
      Alarm Request Alarm request signal / Not Req or Request

      Request: When beeping

      Not Req: When not beeping

      		 -
      All Throttle Close Rqst All throttle close request / Not Req or Request

      ON: Request

      OFF: Not Req

      		 -
      Brake Control Request Brake control request/OFF or ON

      ON: Request

      OFF: Not Req

      		 -
      Targ Decl Slope Cruise target deceleration slope / 0, 1, 2, 3 0, 1, 2, 3 -
      CCS Vehicle Spd Vehicle speed sensor / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed -
      CCS Mem Vehicle Spd Cruise control memorized speed / min.: 36 km/h (22.5 mph), max.: 200 km/h (125 mph) Memorized speed: Cruise control activated -
      Throttle Opening Angle Throttle opening angle / min.: 0°, max.: 124.5° Actual demanded throttle angle -
      Cruise Control Cruise control system active condition / ON or OFF

      ON: Cruise control activated

      OFF: Cruise control deactivated

      		 -
      Main SW M-CPU Cruise control switch signal (Main CPU) / ON or OFF

      ON: Cruise control switch on

      OFF: Cruise control switch off

      		 -
      CCS Ready M-CPU Cruise control system standby condition (Main CPU) / ON or OFF Each time main switch is pushed, ON/OFF changes -
      CCS Indicator M-CPU Cruise indicator signal (Main CPU) / ON or OFF

      ON: Cruise control indicator light on

      OFF: Cruise control indicator light off

      		 -
      Cancel Switch CANCEL switch signal / ON or OFF

      ON: CANCEL switch on

      OFF: CANCEL switch off

      		 -
      SET/COAST Switch -/SET switch signal / ON or OFF

      ON: -/SET switch on

      OFF: -/SET switch off

      		 -
      RES/ACC Switch +/RES switch signal / ON or OFF

      ON: +/RES switch on

      OFF: +/RES switch off

      		 -
      Stp Light Switch1 Stop light switch signal / ON or OFF

      ON: Brake pedal depressed

      OFF: Brake pedal released

      		 -
      Stp Light Switch2 Stop light switch signal / ON or OFF

      ON: Brake pedal depressed

      OFF: Brake pedal released

      		 -
      Cruise Operation Status Cruise control condition / ON or OFF

      ON: Cruise control operated

      OFF: Cruise control operation stopped

      		 -
      VSC Fail Safe Flag VSC fail-safe flag / Not Req or Request VSC communication fail safe in operation -
      Brake Cancel Switch Brake cancel signal / ON or OFF

      ON: Brake pedal depressed

      OFF: Brake pedal released

      		 -
      Distance Control Distance control switch signal / ON or OFF

      ON: Distance control switch on

      OFF: Distance control switch off

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. For Cruise Control Indicator Light (Combination Meter Assembly):

      Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. For Skid Control Buzzer Assembly (ABS/VSC/TRAC):

      Enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.

    6. Perform Active Test according to the display on the GTS.

      Tech Tips

      The engine switch must be turned on (IG) to proceed with the Active Test using the GTS.

      Combination Meter
      Tester Display Test Part Control Range Diagnostic Note
      Indicat. Lamp Cruise

      Cruise control indicator light

      (Constant speed control mode)

      		 OFF or ON -
      Indicat. Radar Cruise

      Cruise control indicator light

      (Vehicle-to-vehicle distance control mode)

      		 OFF or ON -
      Indicat. SET Cruise control SET indicator light OFF or ON -
      ABS/VSC/TRAC
      Tester Display Test Part Control Range Diagnostic Note
      DSS Signal Buzzer Skid control buzzer Buzzer ON/OFF Buzzer can be heard