STARTER DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. A01G6WF

      Remove the nut and disconnect the lead wire from the magnet switch.

    2. A01G8AC

      Holding the magnet switch to the starter drive housing assembly, remove the 2 screws.

    3. Remove the magnet switch.

    4. Remove the return spring and plunger from the starter drive housing assembly.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01G6DP

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

    2. A01G58V

      Remove the starter yoke assembly from the starter commutator end frame assembly.

  3. REMOVE STARTER ARMATURE PLATE


    1. A01G6VY

      Remove the starter armature plate from the starter yoke assembly.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A01G7F3

      Using a screwdriver, pry out the starter commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01G6KRE09
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and washer.

      Note

      Do not drop the starter armature assembly.

    2. Remove the starter armature assembly from the starter commutator end frame assembly.

  6. REMOVE PLANETARY GEAR


    1. A01G9N6

      Remove the 3 planetary gears from the starter drive housing assembly.