OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH (w/ Oil Cooler)

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/o Oil Cooler)


    1. Disconnect the engine oil pressure switch connector.

    2. A01G9BP

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.

  6. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/ Oil Cooler)


    1. A01G66SE01

      Disconnect the wire harness protector.

    2. Disconnect the engine oil pressure switch connector.

    3. A01G9E1

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.