OIL AND OIL FILTER REPLACEMENT

CAUTION:


  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water or waterless hand cleaner to remove any used engine oil thoroughly. Do not use gasoline, thinners, or solvents.

  • In order to preserve the environment, used oil and used oil filters must be disposed of at designated disposal sites.


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and drain the oil into a container.

    3. Clean the oil pan drain plug.

    4. Install the oil pan drain plug with a new gasket.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  2. REMOVE OIL FILTER CAP ASSEMBLY


    1. A01G7X6E01
      Text in Illustration
      *1 Pipe
      *2 Hose

      Connect a hose with an inside diameter of 15 mm (0.591 in.) to the pipe.

    2. A01G57W

      Remove the oil filter drain plug from the oil filter cap assembly.

    3. A01G944E02
      Text in Illustration
      *1 Oil Filter Cap Assembly
      *2 O-ring
      *3 Pipe

      Insert the pipe with the hose into the oil filter cap assembly.

      Note

      Be sure to insert the pipe with the O-ring installed on the oil filter cap assembly.

      Tech Tips

      Place the hose end into a container before draining oil from the hose.

    4. A01G69J

      Make sure that the oil is completely drained, and remove the pipe and O-ring.

      Tech Tips

      Be sure to turn the pipe in the direction of the arrow to remove it.

    5. A01G6B5E01

      Using SST, remove the oil filter cap assembly.

      SST
      09228-06501
    6. A01G5AQE06
      Text in Illustration
      *1 Oil Filter Element
      *2 Oil Filter Cap Assembly
      *3 O-ring

      Remove the oil filter element and O-ring from the oil filter cap assembly.

      Note

      Do not use any tools to remove the O-ring in order to prevent the oil filter cap assembly from being damaged. Be sure to remove it by hand.

  3. INSTALL OIL FILTER CAP ASSEMBLY


    1. Clean the inside of the oil filter cap assembly, threads and O-ring groove.

    2. A01G6EFE01
      Text in Illustration
      *1 O-ring
      *a CORRECT
      *b INCORRECT

      Apply a light coat of engine oil to a new O-ring and install it to the oil filter cap assembly.

      Note


      • Be sure to install the O-ring in the proper location, otherwise oil may leak.

      • Do not twist the O-ring.

    3. Install a new oil filter element to the oil filter cap assembly.

    4. Remove all dirt and foreign matter from the installation surface and the inside of the oil filter cap assembly on the engine side.

    5. Apply a light coat of engine oil to the O-ring again and install the oil filter cap assembly.

      Note

      Make sure that the O-ring does not get caught between the parts.

    6. A01G8WXE01
      Text in Illustration
      *1 Oil Filter Cap Assembly
      *2 O-ring
      *3 Oil Filter Bracket
      *a No Gap

      Using SST, install the oil filter cap assembly.

      SST
      09228-06501
      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      After tightening the oil filter cap assembly, make sure that there is no gap and that the O-ring is not protruding.

    7. A01G4D1E03
      Text in Illustration
      *1 O-ring

      Apply a light coat of engine oil to a new O-ring and install it to the oil filter cap assembly.

      Note

      Remove all dirt and foreign matter from the installation surface.

    8. Install the oil filter drain plug to the oil filter cap assembly.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

      Note

      Make sure that the O-ring does not get caught between the parts.

  4. ADD ENGINE OIL


    1. A01G8XW

      Add clean engine oil and install the oil filler cap.

      Note

      Do not allow engine oil adhere to the moving parts of the belt tensioner, as this may cause malfunctions.

      If engine oil is on the location indicated by the arrow, replace the belt tensioner.

      Standard Oil Grade:
      Oil Grade Oil Viscosity (SAE)

      • API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil

      • 0W-20


      • 5W-20


      • 5W-30


      • 10W-30
      API grade SL, SM or SN multigrade engine oil

      • 15W-40


      • 20W-50
      Standard Capacity
      Item Standard Condition
      Drain and refill with oil filter change 6.1 liters (6.4 US qts, 5.4 Imp. qts)
      Drain and refill without oil filter change 5.7 liters (6.0 US qts, 5.0 Imp. qts)
      Dry fill 6.8 liters (7.2 US qts, 6.0 Imp. qts)

  5. INSPECT FOR OIL LEAK