LUBRICATION SYSTEM ON-VEHICLE INSPECTION


  1. INSPECT ENGINE OIL LEVEL


    1. Warm up and stop the engine, and then wait 5 minutes.

    2. Check that the engine oil level is between the low level mark and full level mark on the engine oil level dipstick.

      If the level is low, check for leakage and add engine oil up to the full level mark.

      Note

      Do not fill the engine with oil to above the full level mark.

  2. INSPECT ENGINE OIL QUALITY


    1. Check the engine oil for deterioration, water contamination, discoloration or thinning. If the quality is visibly poor, replace the engine oil and oil filter element.

  3. INSPECT OIL PRESSURE


    1. Remove the engine oil pressure switch assembly Click here.

    2. A01G6WYE02
      Text in Illustration
      *1 Oil Pressure Gauge

      Install an oil pressure gauge with the adapter.

    3. Warm up the engine.

    4. Measure the engine oil pressure.

      Standard Oil Pressure
      Condition Specified Condition
      Idle

      30 kPa (0.3 kgf/cm2, 4.4 psi) or more
      4000 rpm

      260 kPa (2.7 kgf/cm2, 38 psi) or more

    5. Remove the oil pressure gauge with the adapter.

    6. Install the engine oil pressure switch assembly Click here.