ENGINE OIL COOLER REMOVAL


  1. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Loosen the radiator drain cock plug.

    2. Loosen the 2 cylinder block drain cock plugs.

    3. Remove the radiator cap sub-assembly.

      A01G49BE01
      Text in Illustration
      *1 Radiator Cap Sub-assembly *2 Cylinder Block Drain Cock Plug
      *3 Radiator Drain Cock Plug *4 Air Drain Cock Plug

      Tech Tips

      Collect the engine coolant in a container and dispose of it according to the regulations in your area.

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and drain the oil into a container.

    3. Clean the oil pan drain plug.

    4. Install the oil pan drain plug with a new gasket.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. REMOVE EXHAUST MANIFOLD ASSEMBLY LH

    Click here

  4. REMOVE OIL COOLER ASSEMBLY


    1. A01G6U6

      Remove the bolt, 2 clamps, 4 clips, No. 4 water by-pass hose and No. 5 water by-pass hose.

    2. A01G8LK

      Remove the oil cooler union bolt, oil cooler assembly and O-ring.