POWER OUTLET SOCKET REMOVAL


  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G7SVE01
      Text in Illustration
      *a Lower Center Instrument Panel Finish Panel Hole

      Insert a moulding remover as shown in the illustration.

    2. A01G5J0

      Disengage the 2 claws and 5 clips and remove the lower center instrument panel finish panel as shown in the illustration.

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01G8NA

      Turn the shift lever knob sub-assembly counterclockwise and remove it.

  3. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01G6BV

      Disengage the 7 claws and 4 clips.

    3. Disengage the clamp.

    4. Disconnect each connector and remove the console panel sub-assembly.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01G8GN

      Disengage the 10 claws and clip.

    2. Disconnect the connector and remove the upper console panel sub-assembly.

  5. REMOVE NO. 3 BOX PANEL


    1. A01G44R

      Disengage the 4 claws and 3 guides as shown in the illustration.

    2. Disconnect each connector and remove the No. 3 box panel.

  6. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY


    1. A01G94IE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.

      Tech Tips

      Tape a screwdriver tip before use.

  7. REMOVE NO. 1 POWER OUTLET SOCKET COVER


    1. A01G5LK

      Disengage the 2 claws and remove the No. 1 power outlet socket cover.