REAR SUNSHADE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use this procedure to troubleshoot the rear sunshade system.

  • *: Use the GTS.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer to confirm the trouble Click here.


      NEXT

  3. INSPECT BATTERY VOLTAGE


    1. Measure the battery voltage.

      Standard Voltage
      11 to 14 V

      • If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


      NEXT

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Using the GTS, check if the CAN communication system is functioning normally Click here.

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

      B

      GO TO CAN COMMUNICATION SYSTEM Click here

      A

  5. CHECK COMBINATION METER ASSEMBLY


    1. Check that the operation of the shift indicator on the combination meter assembly.

      OK
      The shift indicator on the combination meter assembly operates normally.

      NG

      GO TO METER / GAUGE SYSTEM Click here

      OK

  6. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault not listed in problem symptoms table A
      Fault listed in problem symptoms table B

      B

      Go to step 8
      A

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU Click here

    2. Operation Check Click here

    3. Data List / Active Test Click here


      NEXT

  8. REPAIR OR REPLACE


    NEXT

  9. CONFIRMATION TEST


    NEXT
    END