FRONT EVAPORATOR TEMPERATURE SENSOR REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE BLOWER ASSEMBLY


    1. A01G4VY

      Disengage each clamp.

    2. Disconnect the connector.

    3. A01G6VG

      Remove the 2 screws.

    4. A01G7FC

      Disengage the 2 guides as shown in the illustration.

    5. Disengage the 2 claws and remove the blower assembly.

  3. REMOVE AIR CONDITIONING HARNESS ASSEMBLY


    1. Disconnect each connector.

      A01G6CLE01
      Text in Illustration
      *A for 3 Zone Type - -

    2. Disengage each clamp and remove the air conditioning harness assembly.

  4. REMOVE HEATER PACKING


    1. A01G502

      Remove the heater packing as shown in the illustration.

  5. REMOVE COOLER EXPANSION VALVE


    1. A01G7KG

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.

  6. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    1. A01G8UI

      Remove the 6 screws.

    2. Disengage the 7 claws and remove the plate cover.

    3. A01G87U

      Disengage the clamp.

    4. Remove the No. 1 cooler evaporator sub-assembly with evaporator temperature sensor (No. 1 cooler thermistor) from the plate cover.

    5. A01G6AF

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

  7. REMOVE EVAPORATOR TEMPERATURE SENSOR (NO. 1 COOLER THERMISTOR)


    1. A01G5J6

      Remove the evaporator temperature sensor (No. 1 cooler thermistor).