PTC HEATER ASSEMBLY REMOVAL


  1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  2. REMOVE SHIFT LEVER SUPPORT

    for U660E Automatic Transmission / Transaxle: Click here

    for U760E Automatic Transmission / Transaxle: Click here

  3. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    1. A01G4Y8

      Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.

  4. REMOVE QUICK HEATER ASSEMBLY


    1. A01G9TV

      Remove the bolt.

    2. Disconnect the connector.

    3. Disengage the 5 clamps.

    4. A01G7O3

      Remove the 2 screws and quick heater assembly as shown in the illustration.