FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A01G6ILE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Connect the connector.

    4. Engage each clamp under the front seat assembly.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01G9IFE02
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. Engage the 3 claws and 4 guides to install the front seat inner cushion shield.

    2. Install the screw.

    3. Install the clip.

  4. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot light)


    1. Connect the rubber band of the front seatback board sub-assembly to the front seat adjuster assembly.

  5. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot light)


    1. for Driver Side:


      1. Connect the connector.

      2. Engage the 2 clamps.

    2. for Front Passenger Side:


      1. Connect the connector.

      2. Engage the clamp.

    3. Engage the 2 fasteners.

    4. Connect the rubber band of the front seatback board sub-assembly to the front seat adjuster assembly.

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here