FRONT SEAT INNER BELT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot light)


    1. A01G8V3

      Disconnect the rubber band of the front seatback board sub-assembly from the front seat adjuster assembly.

  3. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot light)


    1. A01G8V3

      Disconnect the rubber band of the front seatback board sub-assembly from the front seat adjuster assembly.

    2. A01G4LE

      Disengage the 2 fasteners.

    3. for Driver Side:


      1. A01G8F3

        Disengage the 2 clamps.

      2. Disconnect the connector.

    4. for Front Passenger Side:


      1. A01G9FY

        Disengage the clamp.

      2. Disconnect the connector.

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01G6BC

      Remove the clip.

    2. A01G45C

      Remove the screw.

    3. A01G8XF

      Disengage the 3 claws and 4 guides to remove the front seat inner cushion shield.

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01G7DF

      Disconnect the connector.

    3. Disengage the clamp.

    4. Remove the nut and front seat inner belt assembly.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01G8Y7

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly.