INSTALL COOLER CONTROL SWITCH ASSEMBLY
Engage the 4 claws to install the cooler control switch assembly to the rear center seat armrest panel sub-assembly.
Connect the 2 connectors.
INSTALL REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY
w/o Climate Control Seat System
Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the rear center seat armrest box assembly.
Install the screw.
w/ Climate Control Seat System
Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the cooler control switch assembly.
Install the screw.
INSTALL REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY
Engage the guide.
Install the rear center seat armrest door sub-assembly with the 2 screws.
Close the rear center seat armrest door sub-assembly as shown in the illustration.
INSTALL REAR CENTER SEAT ARMREST ASSEMBLY
Engage the hook to install the rear center seat armrest assembly to the rear seat armrest hole board sub-assembly.
INSTALL REAR CENTER SEAT ARMREST HINGE
Engage the 2 guides.
Install the rear center seat armrest hinge with the 2 bushes and 2 screws.
INSTALL REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX
Engage the 2 claws.
Using hog ring pliers, install 4 new hog rings.
| *1 | Hook |
| *2 | Clamp |
Install the rear center seat armrest assembly with box with the 2 nuts.
w/ Climate Control Seat System:
Engage the 3 clamps.
Engage the 2 hooks.
INSTALL REAR SEATBACK ASSEMBLY
Place the rear seatback assembly in the cabin.
Note
Be careful not to damage the vehicle body.
Engage the 3 hooks.
Connect the rear seat 3 point type outer belt assembly LH, rear seat 3 point type outer belt assembly RH and rear seat inner with center belt assembly LH to the rear seatback assembly.
Install the rear seatback assembly with the 4 bolts.
Engage the 2 clamps to connect the 2 rear seat airbag assembly wire harnesses.
Connect the 2 rear seat airbag assembly connectors.
Engage the claw to connect the rear center seat shoulder belt guide.
Engage the claw to connect the rear seat shoulder belt guide RH.
Engage the claw to connect the rear seat shoulder belt guide LH.
INSTALL REAR SEAT CUSHION ASSEMBLY
Place the rear seat cushion assembly in the cabin.
Note
Be careful not to damage the vehicle body.
w/ Climate Control Seat System:
Connect the rear seat heater connector.
Pass the buckle of the rear seat inner with center belt assembly LH and buckle of the rear seat inner with center belt assembly RH through the rear seat cushion assembly.
| *1 | Rear Seatback Hinge Hook |
Engage the 2 hooks <B> on rear side of the rear seat cushion assembly to the rear seatback hinge hook.
Engage the 2 hooks <A> on the front side of the rear seat cushion assembly to the vehicle body as shown in the illustration.
Confirm that the rear seat cushion assembly is firmly installed.
Note
When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSPECT SRS WARNING LIGHT