SEAT HEATER SWITCH (for Rear Side) REMOVAL


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR SEAT HEADREST ASSEMBLY

  4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

  5. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01G6Q7E01
      Text in Illustration
      *1 Rear Seatback Hinge Hook

      Disengage the 2 hooks <A> on the front side of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the rear seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Disengage the 2 hooks <B> on the rear side of rear seat cushion assembly from the rear seatback hinge hook.

    3. A01G4F5E01
      Text in Illustration
      *1 Buckle of the Rear Seat Inner with Center Belt Assembly LH
      *2 Buckle of the Rear Seat Inner with Center Belt Assembly RH

      Remove the buckle of the rear seat inner with center belt assembly LH and buckle of the rear seat inner with center belt assembly RH from the rear seat cushion assembly.

    4. w/ Climate Control Seat System:


      1. Disconnect the rear seat heater connector.

    5. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEATBACK ASSEMBLY


    1. A01G7EBE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and disconnect the rear seat shoulder belt guide LH.

    2. A01G4LAE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and disconnect the rear seat shoulder belt guide RH.

    3. A01G7ZHE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and disconnect the rear center seat shoulder belt guide.

    4. Disconnect the 2 rear seat airbag assembly connectors.

    5. A01G4AVE01
      Text in Illustration
      *1 Clamp
      *2 Hook
      *3 Rear Seat 3 Point Type Outer Belt Assembly LH
      *4 Rear Seat 3 Point Type Outer Belt Assembly RH
      *5 Rear Seat Inner with Center Belt Assembly LH

      Disengage the 2 clamps and disconnect the 2 rear seat airbag assembly wire harnesses.

    6. Remove the 4 bolts.

    7. Disconnect the rear seat 3 point type outer belt assembly LH, rear seat 3 point type outer belt assembly RH and rear seat inner with center belt assembly LH from the rear seatback assembly.

    8. Disengage the 3 hooks and remove the rear seatback assembly.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX


    1. A01G9MGE01
      Text in Illustration
      *1 Hook
      *2 Clamp

      Disengage the 2 hooks.

    2. w/ Climate Control Seat System:


      1. Disengage the 3 clamps.

    3. Remove the 2 nuts.

    4. A01G8LQ

      Remove the 4 hog rings.

    5. Disengage the 2 claws and remove the rear center seat armrest assembly with box.

  8. REMOVE REAR CENTER SEAT ARMREST HINGE


    1. A01G9RM

      Remove the 2 screws and 2 bushes.

    2. Disengage the 2 guides and remove the rear center seat armrest hinge.

  9. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY


    1. A01G5PQ

      Disengage the hook and remove the rear center seat armrest assembly from the rear seat armrest hole board sub-assembly.

  10. REMOVE REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY


    1. A01G91O

      Open the rear center seat armrest door sub-assembly as shown in the illustration.

    2. Remove the 2 screws.

    3. Disengage the guide and remove the rear center seat armrest door sub-assembly.

  11. REMOVE REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY


    1. w/o Climate Control Seat System:


      1. A01G4ZI

        Remove the screw.

      2. Disengage the 8 claws and 3 guides, and remove the rear center seat armrest panel sub-assembly with the rear center seat armrest box assembly.

    2. w/ Climate Control Seat System:


      1. A01G9IN

        Remove the screw.

      2. Disengage the 8 claws and 3 guides, and remove the rear center seat armrest panel sub-assembly with the cooler control switch assembly.

  12. REMOVE COOLER CONTROL SWITCH ASSEMBLY


    1. A01G54F

      Disconnect the 2 connectors.

    2. A01G9V7

      Disengage the 4 claws and remove the cooler control switch assembly from the rear center seat armrest panel sub-assembly.