LUMBAR SUPPORT ADJUSTER ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE POWER SEAT SWITCH ASSEMBLY (for Front Passenger Side with Power Seat Switch Assembly)


    1. A01G4EZ

      Disengage the 2 claws to separate the power seat switch assembly from the front seat assembly RH.

    2. A01G6OF

      Disconnect the connector to remove the power seat switch assembly.

  3. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot Light)


    1. A01G8V3

      Disconnect the rubber band of the front seatback board sub-assembly from the front seat adjuster assembly.

  4. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot Light)


    1. A01G8V3

      Disconnect the rubber band of the front seatback board sub-assembly from the front seat adjuster assembly.

    2. A01G4LE

      Disengage the 2 fasteners.

    3. for Driver Side:


      1. A01G8F3

        Disengage the 2 clamps.

      2. Disconnect the connector.

    4. for Front Passenger Side:


      1. A01G9FY

        Disengage the clamp.

      2. Disconnect the connector.

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01G6BC

      Remove the clip.

    2. A01G45C

      Remove the screw.

    3. A01G8XF

      Disengage the 3 claws and 4 guides to remove the front seat inner cushion shield.

  6. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A01G8DP

      Remove the 2 screws.

    2. Disengage the 2 claws and 2 clips to remove the front inner No. 1 seat cushion shield.

  7. REMOVE FRONT POWER ADJUSTER SHIELD


    1. A01G589

      Remove the 2 screws.

    2. Disengage the 2 claws to remove the front power adjuster shield.

    3. w/ Variable Seat Cushion System:


      1. A01G7PB

        Disconnect the connector from the seat variable cushion switch.

    4. w/o Seat Position Memory System:


      1. A01G6UF

        Disconnect the connector from the front power seat switch.

    5. w/ Seat Position Memory System:


      1. A01G9FP

        Disconnect the 2 connectors from the front power seat switch.

    6. A01G63M

      Disconnect the connector from the front lumbar power seat switch.

  8. REMOVE FRONT SEAT CUSHION SHIELD


    1. A01G87M

      Remove the 2 screws.

    2. A01G6XQ

      Disengage the 3 claws and 5 guides to remove the front seat cushion shield.

  9. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    1. A01G9IC

      Remove the 2 screws.

    2. Disengage the 2 hooks to remove the front seatback board sub-assembly.

  10. REMOVE SEATBACK CLIMATE CONTROL COVER (w/ Climate Control Seat System)


    1. A01G8E0

      Remove the 4 screws to remove the seatback climate control cover.

  11. DISCONNECT CONNECTOR (w/ Seat Heater System)


    1. A01G6NN

      Disconnect the connector.

    2. Disengage the clamp.

  12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01G6GK

      Disengage the claw and 2 clamps to separate the front seat airbag assembly wire harness.

    2. A01G6CX

      Remove the 2 hog rings.

    3. A01G4HK

      Disengage each hook.

    4. A01G68K

      Remove the 2 hog rings.

    5. A01G986E01
      Text in Illustration
      *1 Bracket

      Remove the 2 nuts and the 3 brackets.

    6. A01G52G

      Disengage each claw and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  13. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. A01G9OM

      Disconnect the connector.

    2. A01G6BB

      Remove the 4 screws and seatback climate control blower.

  14. REMOVE SEATBACK CLIMATE CONTROL DUCT (w/ Climate Control Seat System)


    1. A01G8C3

      Disengage the 2 claws to remove the seatback climate control duct from the seatback climate control blower.

  15. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. A01G9OX

      Disengage each claw to remove the 2 front seatback edge protectors.

  16. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. Disconnect each connector and disengage each clamp from the lumbar support adjuster assembly.

    2. A01G8YK

      Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

  17. REMOVE FRONT SEATBACK HOOK


    1. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.