LUMBAR SWITCH INSPECTION


  1. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY LH


    1. A01G69PE03
      Text in Illustration
      *1 Release Switch
      *2 Hold Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Hold Below 1 Ω
      4 - 5
      3 - 4 Off
      4 - 5
      2 - 5 Release
      3 - 4

      If the result is not as specified, replace the front power seat switch assembly LH.

  2. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY RH


    1. A01G6O3E03
      Text in Illustration
      *1 Hold Switch
      *2 Release Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Hold Below 1 Ω
      4 - 5
      3 - 4 Off
      4 - 5
      2 - 5 Release
      3 - 4

      If the result is not as specified, replace the front power seat switch assembly RH.