POWER SEAT SWITCH (w/o Seat Position Memory System) INSPECTION


  1. INSPECT FRONT POWER SEAT SWITCH LH


    1. A01G4M9E06
      Text in Illustration
      *1 Front Vertical Switch
      *2 Slide Switch
      *3 Lifter Switch
      *4 Reclining Switch
      *a

      Component without harness connected

      (Front Power Seat Switch LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Condition Specified Condition
      2 - 11 Front Below 1 Ω
      5 - 8
      2 - 11 Off
      5 - 11
      2 - 8 Rear
      5 - 11
      Front Vertical Switch
      Tester Connection Condition Specified Condition
      1 - 8 Up Below 1 Ω
      6 - 11
      1 - 11 Off
      6 - 11
      1 - 11 Down
      6 - 8
      Lifter Switch
      Tester Connection Condition Specified Condition
      3 - 8 Up Below 1 Ω
      4 - 11
      3 - 11 Off
      4 - 11
      3 - 11 Down
      4 - 8
      Reclining Switch
      Tester Connection Condition Specified Condition
      1 - 10 Front Below 1 Ω
      6 - 10
      8 - 10
      9 - 11
      9 - 11 Off
      10 - 11
      3 - 9 Rear
      4 - 9
      8 - 9
      10 - 11

      If the result is not as specified, replace the front power seat switch LH.

  2. INSPECT FRONT POWER SEAT SWITCH RH


    1. A01G5JJE01
      Text in Illustration
      *1 Front Vertical Switch
      *2 Slide Switch
      *3 Lifter Switch
      *4 Reclining Switch
      *a

      Component without harness connected

      (Front Power Seat Switch RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Condition Specified Condition
      2 - 13 Front Below 1 Ω
      5 - 10
      2 - 10 Off
      5 - 10
      2 - 10 Rear
      5 - 13
      Front Vertical Switch
      Tester Connection Condition Specified Condition
      1 - 10 Up Below 1 Ω
      6 - 13
      1 - 10 Off
      6 - 10
      1 - 13 Down
      6 - 10
      Lifter Switch
      Tester Connection Condition Specified Condition
      3 - 10 Up Below 1 Ω
      4 - 13
      3 - 10 Off
      4 - 10
      3 - 13 Down
      4 - 10
      Reclining Switch
      Tester Connection Condition Specified Condition
      1 - 11 Front Below 1 Ω
      6 - 11
      10 - 12
      11 - 13
      10 - 11 Off
      10 - 12
      10 - 11 Rear
      3 - 12
      4 - 12
      12 - 13

      If the result is not as specified, replace the front power seat switch RH.