POWER SEAT SWITCH (w/o Seat Position Memory System) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A01G8DP

      Remove the 2 screws.

    2. Disengage the 2 claws and 2 clips to remove the front inner No. 1 seat cushion shield.

  3. REMOVE FRONT POWER ADJUSTER SHIELD


    1. A01G589

      Remove the 2 screws.

    2. Disengage the 2 claws to remove the front power adjuster shield.

    3. w/ Variable Seat Cushion System:


      1. A01G7PB

        Disconnect the connector from the seat variable cushion switch.

    4. w/o Seat Position Memory System:


      1. A01G6UF

        Disconnect the connector from the front power seat switch.

    5. w/ Seat Position Memory System:


      1. A01G9FP

        Disconnect the 2 connectors from the front power seat switch.

    6. A01G63M

      Disconnect the connector from the front lumbar power seat switch.

  4. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01G81B

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  5. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01G5FO

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  6. REMOVE FRONT POWER SEAT SWITCH


    1. A01G4L2

      Remove the 3 screws and front power seat switch from the front power adjuster shield.