POWER SEAT SWITCH (for Front Passenger Side) INSPECTION


  1. INSPECT POWER SEAT SWITCH ASSEMBLY


    1. A01G5RVE02
      Text in Illustration
      *1 Reclining Switch
      *2 Slide Switch
      *a

      Component without harness connected

      (Power Seat Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Reclining Switch
      Tester Connection Condition Specified Condition
      3 - 4 Front Below 1 Ω
      3 - 4 Off 10 kΩ or higher
      3 - 5
      3 - 5 Rear Below 1 Ω
      Slide Switch
      Tester Connection Condition Specified Condition
      2 - 3 Front Below 1 Ω
      2 - 3 Off 10 kΩ or higher
      1 - 3
      1 - 3 Rear Below 1 Ω

      If the result is not as specified, replace the power seat switch assembly.