POWER WINDOW MASTER SWITCH REMOVAL


  1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01G55U

      Using a moulding remover, disengage the 2 clips, 6 claws and 2 guides as shown in the illustration.

    2. Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A01G4OA

      Remove the 3 screws and multiplex network master switch assembly from the front upper door armrest base panel.