EXHAUST PIPE REMOVAL


  1. REMOVE TAIL EXHAUST PIPE LH


    1. A01G7RQ

      Remove the 2 nuts.

    2. Remove the tail exhaust pipe assembly LH from the 2 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly.

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A01G7CX

      Remove the 2 nuts.

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly.

  3. REMOVE EXHAUST PIPE DAMPER


    1. A01G9JI

      Remove the 2 bolts and exhaust pipe damper.

  4. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. A01G7OX

      Remove the 2 bolts and 2 nuts.

    2. Remove the center exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  5. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  6. REMOVE ENGINE UNDER COVER RH

  7. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)


    1. A01G729

      Remove the 2 nuts and No. 1 exhaust pipe support bracket (for Front Side).

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01G7OW

      Disconnect the 2 wire harnesses from the clamp.

    2. Disconnect the 2 heated oxygen sensor connectors.

    3. A01G4IA

      Remove the 2 bolts and 2 nuts.

    4. Remove the front exhaust pipe assembly from the No. 1 exhaust pipe support bracket (for Rear Side).

    5. Remove the 2 gaskets from the front exhaust pipe assembly.

  9. REMOVE HEATED OXYGEN SENSOR (for Bank 1)


    1. A01G64TE01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00010

  10. REMOVE HEATED OXYGEN SENSOR (for Bank 2)


    1. A01G6BFE01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00010

  11. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Tail Exhaust Pipe Baffle)


    1. A01G7UF

      Remove the 2 tail exhaust pipe baffle sub-assemblies.