EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  2. REMOVE ENGINE UNDER COVER RH (w/ Front Lower Bumper Absorber)

  3. REMOVE ENGINE UNDER COVER RH (w/o Front Lower Bumper Absorber)

  4. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    1. A01G5TP

      Disconnect the radiator reserve tank hose.

    2. Remove the 2 bolts and radiator reserve tank assembly.

  5. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)


    1. A01G729

      Remove the 2 nuts and No. 1 exhaust pipe support bracket (for Front Side).

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01G7OW

      Disconnect the 2 wire harnesses from the clamp.

    2. Disconnect the 2 heated oxygen sensor connectors.

    3. A01G545

      Remove the 2 bolts and No. 1 exhaust pipe support bracket (for Rear Side).

    4. A01G6G8

      Remove the 4 bolts, 4 nuts and front exhaust pipe assembly.

    5. Remove the 3 gaskets from the front exhaust pipe assembly.

  7. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)


    1. A01G7B3

      Disconnect the air fuel ratio sensor connector.

    2. Disconnect the harness clamp.

    3. A01G9GTE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

      SST
      09224-00010

  8. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01G6JM

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly RH.

    2. A01G7O5

      Remove the gasket from the cylinder head sub-assembly.

  9. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)


    1. A01G8NN

      Disconnect the air fuel ratio sensor connector.

    2. A01G4FZ

      Remove the hose clamp.

    3. A01G8PTE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

      SST
      09224-00010

  10. REMOVE NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A01G88F

      Remove the engine oil level dipstick.

    2. Remove the bolt and No. 2 engine oil level dipstick guide.

    3. A01G49S

      Remove the O-ring from the No. 2 engine oil level dipstick guide.

  11. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01G8SF

      Remove the 3 bolts and No. 2 exhaust manifold heat insulator.

  12. REMOVE NO. 2 MANIFOLD STAY


    1. A01G4BD

      Remove the bolt, nut and No. 2 manifold stay.

  13. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01G9HM

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly LH.

    2. A01G6LB

      Remove the gasket from the cylinder head sub-assembly.