FUEL PUMP INSPECTION


  1. INSPECT FUEL PUMP WITH FILTER ASSEMBLY


    1. A01G7BXE02

      Check the fuel pump resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.2 to 3.0 Ω

        If the result is not as specified, replace the fuel pump with filter assembly.

    2. Check fuel pump operation.


      1. Apply battery voltage to terminals 1 and 2. Check that the fuel pump operates.

        Note


        • These tests must be done quickly (within 10 seconds) to prevent the coil from burning out.

        • Keep the fuel pump with filter assembly as far away from the battery as possible.

        • Always switch the voltage on and off at the battery side, not the fuel pump with filter assembly side.

        If the fuel pump with filter assembly does not operate, replace the fuel pump with filter assembly.