CYLINDER BLOCK REPLACEMENT


  1. REPLACE STRAIGHT PIN


    1. Using a plastic hammer, tap in new straight pins to the cylinder block sub-assembly.

      A01G5FWE09
      Text in Illustration
      *a Front Side *b Rear Side
      *c Upper Side *d Lower Side
      *e RH Side - -
      Standard Protrusion
      Item Protrusion
      Pin A 23 mm (0.906 in.)
      Pin B 6 mm (0.236 in.)
      Pin C 11 mm (0.433 in.)
      Pin D 9 mm (0.354 in.)

  2. REPLACE STUD BOLT


    1. Using an E8 and E10 "TORX" socket wrench, install the stud bolts.

      A01G867E06
      Text in Illustration
      *a Front Side *b LH Side
      Torque:
      Bolt A
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
      Bolt B
      17 N*m  { 173 kgf*cm, 13 ft.*lbf }